EasyManua.ls Logo

WMF espresso NEXT - Water Connection

WMF espresso NEXT
116 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
16
UserManualWMFespressoNEXT
Safety
The device must not be cleaned using awater jet. The device
must be installed where it is protected against water spray.
The device must not be located on asurface that is sprayed or
cleaned with awater hose, steam jet, steam cleaner, or similar
devices.
Do not use the coffee machine outdoors.
Water connection
TW15 (DN 15at least DN 6or 1/4") hose connector with
main water supply and contaminant filter, with amesh size
of 0.08mm, by customers on-site. At least 0.05MPa (0.5bar)
supply pressure at 2l/min (low pressure). At least 0.30MPa
(3.0bar) supply pressure at 2l/min (default). Maximum
0.6MPa(6bar). Maximum inlet temperature 35°C.
The set of hoses provided with the new coffee machine and/or
the new water filter must be used. Do not use the old set of
hoses.
Important. If the customer’s on-site flow pressure exceeds
0.6MPa (6bar), then apressure reducer must absolutely be fitted
upstream and set to amaximum of 0.6MPa(6bar).

Table of Contents

Related product manuals