WMF espresso NEXT - Clean the Catch Pan under the Bean Hopper; Changing the Seals

89
UserManualWMFespressoNEXT
Care | Manual cleaning
✻ Thoroughly wipe out the bean hoppers with adamp
cloth
✻ Allow bean hoppers to dry completely
✻ Clean the catch pan under the bean hopper
✻ Refill and replace bean hoppers
✻ Turn the locks counterclockwise to lock them
5.4.10 Clean the catch pan under
thebeanhopper
Clean the catch pan under the bean hopper regularly.
✻ Unlock and remove the bean hopper
✻ Clean the catch pan below the bean hoppers
5.4.11 Changing the seals
Burn hazard
• The portafilters and the brewing sieves
become very hot during beverage dispensing
and during cleaning.
> Do not touch the portafilters or the brewing
sieves immediately after dispensing or after
“Brewing group cleaning”.
The seals can be changed by the customer when
needed.
✻ In the Care menu, select “Brewer care” for the
desired brewing group (left/right)
The animation provides step-by-step guidance
through the procedure.
✻ Remove the portafilter
✻ Remove the sieve from the portafilter
✻ Insert the portafilter without the sieve
✻ Press
to confirm and continue
CAUTION
Follow the Safety chapter
w starting on page 6
Software
w Care
w Brewer care
page 50