WMF espresso NEXT - Water Quantity; Brewing Temperature

53
UserManualWMFespressoNEXT
Software | Beverages
Ground coffee quantity
Enter in grams (g)
Water quantity
Enter in millilitres (ml)
Brewing temperature
Enter in degrees Celsius (°C)
Pre-infusion/pre-infusion pause
Pause between pre-infusion and brewing, in seconds.
Target contact time
Target contact time for reference beverage.
Indicated in seconds (sec)
The target contact time is the desired ideal value.
The“Dynamic Coffee Assist” function sets the grinding
degree so that this target contact time is achieved as
close as possible.
Reference beverage
The reference beverage is usually the beverage
from the brewing group which is dispensed most.
Thereference beverage is set up by aservice technician
and operator during commissioning. Areference
beverage can be set up for each brewing group.
Thesetting is based on taste considerations. All other
beverage settings are based on the values of this
reference.
The reference beverage can be changed by service.
Espresso or Café Crème is set as the reference beverage
at the factory. Follow the messages on the display.
Indicate yes/no
The reference beverage specifies the
settings and brewing time which
are checked continuously by the
machine. Deviations from these
values are compensated/reported in
order to achieve as accurate values
as possible.