WMF espresso NEXT - Clean the Steam Nozzles

86
UserManualWMFespressoNEXT
Care | Manual cleaning
5.4.8 Clean the steam nozzles
Burn hazard/scalding hazard
• Hot water and steam may escape from the
outlets in the heating-up phase.
• When dispensing beverages and steam, hot
liquid comes out of the spouts. The adjacent
surfaces and spouts become hot.
> Do not reach beneath the spouts during the
heating-up phase.
> When dispensing beverages and steam, do not
reach beneath the spouts.
> Do not touch the spouts immediately after
dispensing.
> Always place asuitable cup underneath when
dispensing.
Pinching or crushing hazard/
risk of injury
• There is arisk of pinching or chrushing when
operating the BasicSteam or AutoSteam
lever.
Clean the AutoSteam outlet
Weekly
✻ Unscrew the steam nozzle and immerse it completely
in the cleaning solution for at least 5hours
✻ Use the steamer brush to clean the openings of the
steam nozzle
✻ Rinse thoroughly with clear drinking water
✻ Screw the steam nozzle onto the AutoSteam outlet
CAUTION
Follow the Safety chapter
w starting on page 6
CAUTION
Follow the Safety chapter
w starting on page 6
Steamer brush
w Accessories and spare parts
page 108