WMF I800S - 3.3.3 Care

24
User Manual WMF1800S
Software, Care
3.3.3 Care
Cleaning and descaling programs are started from the
Care main menu. Filter change (optional) and maintenance
actions are confirmed here.
The main “Care” menu contains the following selection
options.
• Cleaning program
• Foamer cleaning
• Mixer rinsing
• Filter change
• Rinse filter
Cleaning program
 Touch
cleaning prog.
The daily cleaning program starts.
The program automatically executes foamer cleaning if
milk beverages have been dispensed. Mixer rinsing follows
for the WMF1800S with mixer system.
The cleaning program sequence is described in the cleaning
instructions.
Prior to carrying out cleaning, please note the safety
instructions in the safety chapter. Read the cleaning
instructions and the Care chapter, starting on page 36.
Foamer cleaning
 Touch
foamer cleaning
Foamer cleaning starts.
Optional Plug&Clean cleaning.
Foamer cleaning is carried out automatically as an
integral part of the full cleaning program.
In the Software chapter w Care
display-guided sequences are
described in detail.
Physical cleaning actions are
described in the Care chapter.
cleaning prog.
Caution.
Follow the manual.
Observe the Safety chapter.
foamer cleaning
w Cleaning program
Caution.
Hot liquids in the
dispensing area.
Observe the Safety chapter.