WMF I800S - Foamer Rinsing (Optional); Operating Options; Rinsing Interval

30
User Manual WMF1800S
Software, Settings
Foamer rinsing (optional)
Whether automatic foamer rinsing should occur after the
last beverage with milk components is dispensed.
yes/no
Rinsing interval
The time elapsed between the last time abeverage with
milk was dispensed and afoamer rinsing.
Recommended setting: 2minutes.
Operating options
The following operating options are available.
• “Warm rinse” pad (active/inactive)
• Barista pad (active/inactive)
• 2. level (active/inactive)
• ON/OFF switch (direct/via PIN)
• Cancel beverage (yes/no)
• Menu pad (immediate/delayed)
• Error message (normal/symbol)
“Warm rinse” pad (optional)
Standard: inactive.
Barista pad
Standard: inactive.
2nd level/toggle pad
Can only be set by WMFService upon request.
ON/OFF switch
Recommendation for self-service: via PIN.
If “via PIN” is set, then the PIN for the cleaning level will
be queried before switching on or off.
Cancel beverage
Standard: no.
foamer rinsing
rinse interval
options
If customers serve themselves then
some functions can be switched
to inactive.
The pads will not be shown on the
“Ready to operate” display.
w PIN rights, access control
page 32