Software, Settings
Button allocation
The beverages are assigned to the beverage buttons.
This button allocation is set here.
Press the beverage button
Select the desired recipe, for example espresso, from
the list
Select grinder for acoffee beverage
(only for 2grinders)
Press the beverage button
Select recipe, for example espresso
Select grinder (on the right or left)
Select the portioner for the Choc beverage
(only for Twin Choc)
Press the beverage button
Select recipe, for example milk Choc 1
Select portioner (on the right or left)
Weigh grounds
Empty and replace grounds container
Touch
The process dispenses ground coffee directly into the
grounds container and the grounds may then be weighed.
The grind quantity is dispensed once.
Boiler temperature
Set desired boiler temperature
(Change brewing water temperature)
(Standard range of settings 80 - 100°C)
Reset
The coffee machine software is restarted.
Load anew recipe:
the previous settings will be
overwritten by the factory
standard values for the new recipe.
Only adjustable recipes are
indicated.
The portioner cannot be selected
for the Chociatto beverage.
To Next Page
Loading...
