WMF I800S - Page 41

41
User Manual WMF1800S
Care
Use the multitool from the accessories.
 Turn the thread on the brewing unit head counter-
clockwise (illustration3) until the wiper is in the
forward position
 Push the springs outwards over the edge and unlock
(illustration4)
 Swing the insertion chute upwards
 Clean the brewing filter under running water or with
acloth
 Remove residual coffee grounds using apaint-brush or
scrubber
 Rinse the brewing unit under running water
Never clean the brewing unit in adishwasher and never
use any cleaner additives.
 Dry the brewing unit with acloth
Allow to dry completely before reinstalling in the coffee
machine.
Remove coffee grounds residue from the chute.
 Wipe out the coffee grounds towards the front or suck
out using avacuum cleaner
Refit the brewing unit after it has been dried.
 Replace springs in insertion unit (illustration4)
 Hold the pusher compressed and replace the brewing
unit in the chute against rear wall
 Push brewing unit upwards until it engages in the lock
 Replace grounds container
 Close the adjustable screen
If the brewing unit cannot be replaced without
resistance: turn thread on the brewing unit head slightly
to the left or right with the multitool until the brewing
unit slides into the guide.
Never use force.
Illustration 3
Risk to the machine.
Follow the manual.
Illustration 4
Brewing filter
Risk to the machine.
Follow the manual.