Wolf BM-2 - DHW Status Page; Changing the Set DHW Temperature; Changing the DHW Operating Mode

3064202_201602 15
DHW status page
8 DHW status page
Up to 8 cylinders can be connected to the WRS. DHW heating for each cylinder is controlled by its own status
page.
8.1 Changing the set DHW temperature
8.2 Changing the DHW operating mode
(For description of operating modes, see chapter)
Return to the home page
14:12 20.01.13
DHW
25, 30, 35, 40, 45, 50, 55, 60, 65
50.0
Change using rotary selector
Conrm with OK
Key 3
14:12 20.01.13
DHW
Continue with rotary selector
Conrm with OK
1x reheat
Automatic mode
Constant op.
Standby
1 x
14:12 20.01.13
50.0 °C
50.0
°C
Set
DHW
DHW
ON
25, 30, 35, 40, 45, 50, 55, 60, 65
Key 4
14:12
20.01.13
1.5 bar
25.2
°C
1 x
Pressure
Boiler temperature
Heating appliance
Heating mode
Burner ON
Change
Conrm
14:12 20.01.13
50.0 °C
50.0
°C
Set
DHW
DHW
ON
25, 30, 35, 40, 45, 50, 55, 60, 65
Key 2
Change
Conrm
14:12 20.01.13
50.0 °C
50.0
°C
Set
DHW
DHW
ON
25, 30, 35, 40, 45, 50, 55, 60, 65
14:12 20.01.13
50.0 °C
50.0
°C
Set
DHW
DHW
ON
25, 30, 35, 40, 45, 50, 55, 60, 65
Home page