Wolf BM-2 - Default Chapter; Table of Contents

2 3064202_201602
Table of contents
1 Appliance description 5
2 Safety and regulations 6
2.1 General safety instructions 6
2.2 Standards / directives 6
2.3 Installation / commissioning 6
2.4 CE designation 6
2.5 Symbols and warnings 7
2.5.1 Layout of warnings 7
3 Overview of the BM-2 programming unit 8
4 Quick start keys/rotary selector 9
5 Simpliedmode 10
6 Overview of status pages - extended mode 12
7 Heating appliance status page 13
7.1 Using the
1 x
key for 1x DHW heating 13
7.2 Using the
key for emissions test mode 14
8 DHW status page 15
8.1 Changing the set DHW temperature 15
8.2 Changing the DHW operating mode 15
9 Heating circuit status page 16
9.1 Changing the set heating circuit temperature 16
9.2 Changing the heating circuit operating mode 16
10 Mixer status page 17
10.1 Changing the set mixer circuit temperature 17
10.2 Changing the mixer circuit operating mode 17
11 Solar thermal system status page 18
12 Ventilation unit status page 19
12.1 Changing the operating mode / Start - End / ON - OFF 19
Table of contents