Wolf BM-2 - Heating Circuit Status Page; Changing the Set Heating Circuit Temperature; Changing the Heating Circuit Operating Mode

16 3064202_201602
Heating circuit status page
9 Heating circuit status page
9.1 Changing the set heating circuit temperature
(For description of temperature selection, see chapter)
9.2 Changing the heating circuit operating mode
(For description of operating modes, see chapter)
Return to the home page
Key 3
Key 4
14:12
20.01.13
1.5 bar
25.2
°C
1 x
Pressure
Boiler temperature
Heating appliance
Heating mode
Burner ON
Change
Conrm
Key 2
Change
Conrm
Home page
14:12 20.01.13
20.0
°C
Room
Heating circuit
OFF
-4, -3, -2, -1, 0, +1, +2, +3, +4
40.0 °C
Flow
16.0 °C
Outside
14:12 20.01.13
20.0
°C
Room
Heating circuit
OFF
-4, -3, -2, -1, 0, +1, +2, +3, +4
40.0 °C
Flow
16.0 °C
Outside
14:12 20.01.13
20.0
°C
Room
Heating circuit
OFF
-4, -3, -2, -1, 0, +1, +2, +3, +4
40.0 °C
Flow
16.0 °C
Outside
14:12 20.01.13
20.0
°C
Room
Heating circuit
OFF
-4, -3, -2, -1, 0, +1, +2, +3, +4
40.0 °C
Flow
16.0 °C
Outside
14:12 20.01.13
Heating circuit
Continue with rotary selector
Conrm with OK
Party function
Setback mode
Automatic mode
Heating mode
Economy mode
Standby
14:12 20.01.13
Heating circuit
+1
Change using rotary selector
Conrm with OK
-4, -3, -2, -1, 0, +1, +2, +3, +4