Wood-mizer BMS500 - Page 44

MAINTENANCE & TROUBLESHOOTING
Drive Belt Tension
5
5-5 doc121319 MAINTENANCE & TROUBLESHOOTING
See Figure 5-2. Loosen the nuts on the grinder motor mounting bolts. Turn the lower tensioning bolt
clockwise and the upper tensioning bolt counterclockwise to tighten the drive belt. Turn the upper
tensioning bolt clockwise and the lower tensioning bolt counterclockwise to loosen the drive belt.
FIG. 5-2
Upper Tensioning
Bolt
Lower Tensioning
Bolt
IS203_029
Grinder Motor
Mounting Nuts, 4 pcs