Wood-mizer BMS500 - Sharpener Head Lever

REPLACEMENT PARTS
Sharpener Head Lever
REPLACEMENT PARTS doc121319 8-19
8
8.15 Sharpener Head Lever
REF. DESCRIPTION ( Indicates Parts Available In Assemblies Only) PART # QTY
SHARPENER HEAD LEVER - COMPLETE 100809 1
1 SPACER 087965-1 2
2 BEARING, 6301-DDU (NSK) ROLLING 100816 2
3 LEVER, ANGLE ZINC-PLATED 100817-1 1
4 BEARING ASSEMBLY, UCP 203 CX 101108 2
5 BOLT, 12/M10x25 12.9 ISO7379 F81003-84 2
6 BOLT, M12x40-8.8-HEX HEAD FULL THREAD ZINC F81004-4 4
7 BOLT, M16d1f6 x120-8.8 SHOULDER ZINC F81006-34 1
8 NUT, M10-8-B HEX NYLON ZINC LOCK F81033-1 2
9 NUT, M12-8 HEX NYLON ZINC LOCK F81034-2 4
10 NUT, M16-8-HEX NYLON ZINC LOCK F81036-2 1
11 WASHER, 10.5 FLAT ZINC F81055-1 2
12 WASHER, 13 FLAT ZINC F81056-1 12
13 WASHER, 17 FLAT ZINC F81058-1 2
IS203_014
1
2
3
4
5
7
8
9
10
11
12
13
1
2
4
5
6
8
11
12
12
12
13