Safety
Belt Sizes
1
1-6 15doc052207 Safety
1.6 Belt Sizes
See Table 1-1. Belt sizes for the LT10 are shown.
1.7 Blade Sizes
See Table 1-2. Wood-Mizer TRU•SHARP™ offers three types of blades to provide
efficient sawing for all models of sawmills. The engine/motor size of your sawmill and the
type of wood you saw should determine which blade you choose for optimum
performance.
See The Blade Handbook for blade hook angle, tooth height, and tooth set
specifications.
Description Belt Size Wood-Mizer
Part #
Motor Drive Belt E7,5 B81 014819
Blade Pulley Belts
B57
1
1
To insure proper blade tracking, use Goodyear, Dayco Super II, or Browning belts
only.
P04185
TABLE 0-0
Engine/Motor Size Recommended Blade For Sawing:
Softwood Hardwood Frozen or Hard-to-Cut
Wood
5 hp - 15hp B275IH1030
B275IH741030
B375IH929
B375IH929
1
1
TRU•SHARP™ “F” blades use a 9/29 profile (9° hook angle and 29° back angle) and are designed to cut frozen and/or
extremely dense, hard-to-cut wood.
Standard TRU•SHARP™ blades use a 10/30 profile.
16hp or more B376IH1030
B376IH741030
B275IH1030
B275IH741030
B376IH1030
B376IH741030
2
2
Customer may choose preferred blade.
B375IH929
1
Electric Motor B376IH1030
B376IH741030
B275IH1030
B275IH741030
B376IH1030
B376IH741030
2
B375IH929
1
TABLE 0-0
To Next Page
Loading...
