Wood-mizer LT10 - Cutting Capacity; Engine;Motor Specifications; Sawdust Extractor Specifications

Safety
Cutting Capacity
Safety 15doc052207 1-7
1
1.8 Cutting Capacity
See Table 1-3. The log size capacities of the LT10 sawmills are listed below.
1.9 Engine/Motor Specifications
See Table 1-4. The power options available for the LT10 sawmill are listed below.
See Table 1-5. The noise levels of the Wood-Mizer sawmills are listed below.
1.10 Sawdust Extractor Specifications
See Table 1-6. The dust extractor specifications are given below.
Max. Diameter
Max. Length
1
1
Each additional bed frame segment adds approximately 195
cm ( 6’ 5” ) to length capacity.
LT10 with three bed
sections
71 cm 5,4 m
LT10 with two bed
sections
71 cm 3,5 m
TABLE 0-0
Engine/Motor Type Manufacturer Model Number Specifications
5.5 kW Electric Motor Siemens, Germany 1LA7130-2AA60-2 3 x 400V, 50 Hz
TABLE 0-0
Idle Engaged
Sawmill Equipped With Electric
Motor
77,1 dB (A) 80,8 dB (A)
TABLE 0-0
Maximum Capacity
2300 m
3
/h
Collector Inlet Diameters (in
front of fan)
150 mm
Motor Power 3 kW
Number of Sacks for Waste 2 pcs
Total Capacity of Sacks 0.25 mp
Weight 110 kg
TABLE 0-0