Sawmill Alignment
Blade Guide Arm Alignment
Sawmill Alignment 15doc052207 6-9
6
6.5 Blade Guide Arm Alignment
Before aligning the blade guide arm, track the blade on the blade wheels as described in
See Section 3.4
. Move the cutting head so the blade is positioned over the first bed rail.
Level the blade to the bed rail as shown in See Section 3.1
. Adjust the blade guide rollers
so they do not touch the blade.
Vertical Alignment
1. Adjust the blade guide arm all the way out away from the other blade guide (maximum
distance between the guide rollers).
RYS. 6-8
To Next Page
Loading...
