Maintenance
Miscellaneous Lubrication
Maintenance 15doc052207 4-3
4
4.5 Miscellaneous Lubrication
1. Lubricate the tensioner screw and up/down crank handle shaft with a rolling bearing
grease (e.g. ŁT4S or Shell Extreme Pressure Grease) as needed.
See Figure 4-2.
4.6 Blade Wheel Belts
1. Check the blade wheel belts for wear. Replace belts as necessary. Rotating the belts
every 50 hours will give you longer belt life. Use only B57 belts manufactured by
Goodyear or Browning.
2. Periodically check all belts for wear. Replace any damaged or worn belts as needed.
FIG. 4-2
Grease the blade
tensioner thread
50
To Next Page
Loading...
