Safety
Sawmill Maintenance
1
1-4 15doc082114 Safety
1.5 Sawmill Maintenance
CAUTION! Reinstall the track wiper so that it lightly touches the track
bar. If the wiper presses too firmly against the bar, it can cause the
power feed to bind.
CAUTION! Never use grease on the mast rails as it will collect
sawdust.
Always be sure that all safety decals are clean and readable. Replace all damaged safety decals to
prevent personal injury or damage to the equipment. Contact your local distributor, or call your
Customer Service Representative to order more decals.
To Next Page
Loading...
