Safety
Cutting Capacity
Safety 15doc082114 1-15
1
should determine which blade you choose for optimum performance.
See The Blade Handbook for blade hook angle, tooth height, and tooth set specifications.
1.9 Cutting Capacity
See Table 1-4. The log size capacities of the LT10 sawmills are listed below.
1.10 Engine/Motor Specifications
See Table 1-5. The power options available for the LT10 sawmill are listed below.
Engine/Motor Size
Recommended Blade For Sawing
3
:
Softwood Hardwood Frozen or Hard-to-Cut
Wood
5 hp - 15hp B275IH1030
B275IH741030
B375IH929
B375IH929
1
1
TRU•SHARP™ “F” blades use a 9/29 profile (9° hook angle and 29° back angle) and are designed to cut frozen and/or
extremely dense, hard-to-cut wood.
Standard TRU•SHARP™ blades use a 10/30 profile.
16hp or more B376IH1030
B376IH741030
B275IH1030
B275IH741030
B376IH1030
B376IH741030
2
2
Customer may choose preferred blade.
3
LT10 sawmill works with a blade 4.01 m length.
B375IH929
1
Electric Motor B376IH1030
B376IH741030
B275IH1030
B275IH741030
B376IH1030
B376IH741030
2
B375IH929
1
TABLE 1-3
Max. Diameter
Max. Length
1
1
Each additional bed frame segment adds approximately 195
cm ( 6’ 5” ) to length capacity.
LT10 S3 70 cm 5,4 m
LT10 S4 70 cm 7,3 m
TABLE 1-4
Engine/Motor Type Manufacturer Model Number Specifications
5.5 kW Electric Motor Siemens, Germany 1LA7130-2AA60-2 3 x 400V, 50 Hz
TABLE 1-5
To Next Page
Loading...
