SAWMILL ASSEMBLY
Saw Head Assembly
2
2-13 15doc082114 SAWMILL ASSEMBLY
See Figure 2-9.
CAUTION!
The top of the leg should not be higher than the top surface of
the bed rail.
2.5 Saw Head Assembly
1. Using a forklift truck or a winch with lifting capacity of minimum 500 kg, carefully lift the saw head and
set it aside. Attach the winch hook to the bracket on the saw head.
WARNING! When removing the saw head, use extreme care and keep
all persons at a safe distance. Failure to do so may result in serious
injury or death.
FIG. 2-9
To Next Page
Loading...
