Wood-mizer LX25 - Page 25

Setup
Install the clutch cable
3
Setup LX25 8/25/21 3-15
6. Fasten the anti-vibration blocks with the provided hardware, as shown in step . The scale should slide freely through
the blocks.
(See FIG. 3-25 .)
See Section 4.1 Sawmill adjustments to set the blade tension and level the scale.
FIG. 3-25
100B-011
2
3
1
4
Washer, M6 Flat Class 4
Scale
Mast
Mast Bracket
Bolt, M8-1.25x20
Carriage
Anti-vibration Block
Bolt, M6-1.0x30 Class 8
Washer, M8 Flat
Nut, M8-1.25 Hex
Nylock
Nut, M6-1.0 Nylon Lock