Worcester DT10RF User Manual

DT10RF OPTIMISING PROGRAMMER
INSTRUCTION MANUAL
8 716 115 494a (02.2009)
OPERATING & INSTALLATION
INSTRUCTIONS
13
Date and time setting.
The DT10RF OPTIMISING PROGRAMMER comes with a pre-set
clock, which also automatically adjusts for daylight saving time
changes. It is activated automatically on 1st installation. There
should be no need to change these settings, however, should
you wish to, it can be done in Option 05.
Option 05 How to adjust date and time.
1. Enter user options by pressing < and > simultaneously for 3
seconds.
2. Select option 05 by pressing > until 05 appears.
3. To access the year press > once and the year selection is
displayed.
Use the + or - key to select the required year and
press > to accept the change.
The month selection is now displayed.
4. Use the + or - key to select the required month and
press > to accept the change.
The day selection is now displayed.
5. Use the + or - key to select the required day and
press > to accept the change.
The time selection is now displayed.
6. Use the + or - key to select the required time and
press > to accept the change.
Option 6 is now displayed.
DIGISTAT OPTIMISER
USER OPTIONS
8_716_115_494a 9/2/09 09:49 Page 15

Worcester DT10RF Specifications

General

Compatibility	Worcester Bosch Boilers
Display	LCD
Programming	7-day programmable
Mounting	Wall-mounted
Wireless	Yes
RF Frequency	868 MHz
Accuracy	±0.5°C
Type	Digital
Power Source	Battery
Communication	Radio Frequency