TECHNICAL INFORMATION
6 720 641 467 (2010/01)
51
15.5 SUPPLEMENTARY TECHNICAL
INFORMATION
Cylinder reheat times, Inner cylinder 151 Litres of DHW.
Full volume heat-up from 15°C to 55°C with a primary
flow temperature of 60°C takes 2 hours and 15 minutes.
Full volume re-heat to 55°C after 70% of the cylinders
contents were drawn off takes 1 hour and 50 minutes
Manufacturer
Appliance: IVT Värmepumpar, part of Bosch
Thermotechnik GmbH Box 1012, SE-57343 Tranås,
Sweden
Cylinder: BoRö Pannan AB Bangårdsv. 1, SE-95231 Kalix,
Sweden
Important note:
Only genuine Bosch Thermotechnology spare parts can
be used with these products.
Maximum water supply pressure to the pressure reducing valve 16 bar
Operating pressure DHW 3 bar
Expansion vessel charge pressure 3 bar
Expansion valve setting 6 bar
Maximum primary working pressure 2,5 bar
Set opening pressure of the combined temperature and pressure relief valve 7 bar / 95°C
Expansion vessel, 19 Litres 3 bar
Tab. 13 Supplementary technical information
To Next Page
Loading...