Cleaning the drive wheels
Remove mud from wheels with a brush in order to ensure good grip of the tread.
Cleaning the camera
We recommend that users regularly wipe the camera with a rag.
Clearing the charging contacts
• Clean the contact pins located on the charging pile and the charging contacts located on the Landroid Vision using a cloth.
• Periodically remove any build-up of grass clippings or debris around the contact pins and the charging strips to ensure Lan-
droid Vision successfully charges each time.
KEEP IT CHARGED
The heart of Landroid Vision is its 20V Li-Ion Worx Powershare Battery.
• For the proper storage of the battery, make sure it is fully charged and kept in a cool dry place.
• The recommended Landroid Vision operation temperature is between 0-55°C.
• The life-span of Landroid Vision’s battery depends on hours of usage and the length of use per day during the mowing sea-
son.
Landroid Vision can be charged manually
• Connect the charging base to a suitable power supply. The green light on the charging base will turn on.
• Manually dock Landroid Vision into the charging base while Landroid Vision is powered off.
• The green light on the charging base will flash and Landroid Vision will begin to charge.
The battery can be replaced manually
• Press the button on the battery cover and open the cover.
• Take out the old battery and install the new battery pack.
• Close the battery cover.
NOTE: Install the battery pack according to the polarity direction of the battery marked on the physical object.
KEEP IT STORED OVER THE WINTER
Although Landroid Vision is designed and built to survive the most severe weather conditions, we recommend storing it in your
shed or garage during the winter. To prepare it for winter hibernation:
• Clean it thoroughly.
• Fully charge the battery.
• Turn the power off.
Getting back to work in the Spring
When it is time to re-start Landroid Vision for the new season, please perform the following checks:
• Update the time and date settings via the App.
• If you notice signs of oxidation on the charging contacts of Landroid Vision and the charging base, clean these with a fine
grade emery cloth.
• Full charge Landroid Vision’s battery before operating.
KEEP IT UPDATED
Landroid Vision is always improving and new software versions are made available for free. Always keep Landroid Vision
software updated to make the most of your machine.
Check which software version you have
The software version number can be seen when the Landroid Vision is powerd-on.
Maintenance
EN
31
To Next Page
Loading...
