Lithium-Ion cordless circular saw
EN
9
one type of battery pack may create a risk of fire
when used with another battery pack.
o) Do not use any battery pack which is not
designed for use with the equipment.
p) Keep battery pack out of the reach of
children.
q) Retain the original product literature for
future reference.
r) Remove the battery from the equipment
when not in use.
s) Dispose of properly.
SYMBOLS
To reduce the risk of injury, user
must read instruction manual
Warning
Wear ear protection
Wear eye protection
Wear dust mask
Do not expose to rain or water
Do not burn
Li-I on
Do not dispose of batteries.
Return exhausted batteries
to your local collection or
recycling point
Waste electrical products
must not be disposed of with
household waste. Please recycle
where facilities exist. Check with
your local authorities or retailer
for recycling advice.
xINR18/65-y
Cylindrical lithium Ion battery
cells with max diameter of
18mm and max height of
65mm; “x” represents a
number cells serial connected,
blank if 1; “-y” represents a
number of cells paralleled
connected, blank if 1.
Make sure the battery is
removed prior to changing ac-
cessories
Wear protective gloves
Lock
Unlock
Wood
TCT blade
OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the
instruction book carefully.
INTENDED USE:
The tool is intended for ripping and cross-cutting
wood and other materials in straight cutting lines,
while resting firmly on the work piece.
ASSEMBLY AND OPERATION
Action Figure
BEFORE OPERATION
Removing the battery pack See Fig. A1
Charging the battery back See Fig. A2
Installing the battery pack See Fig. A3
To Next Page
Loading...
