WPI EVOM3 - Parts List

EVOM3
World Precision Instruments 7
NOTE: Cleaning the electrode often corrects most of these issues. See "Maintenance"
on page 26.
In the STX2-PLUS manual is a KCl molarity test. This test will demostrate electode
functionality.
Charging the EVOM3
The EVOM3 battery may also be charged with a Mini-B USB cable P/N 803026 (not
supplied).
Parts List
After unpacking, verify that there is no visible damage to the sensor. Verify that all
items are included:
(1) EVOM3 Epithelial Volt Ohm Meter
(1) STX2-Plus Electrode set
(1) 300749 USB drive 32 GB (For storage and this contains a Python 3.8 program for
continuous digital monitoring of a target insert. See page 36.)
(1) 503535 USB cable
(1) 99673 Ω et Reit
(1) 803025 A/C power cord and charger
(1) 13142 Foot switch
Instruction Manuals for the EVOM3 and STX2-Plus electrode can be downloaded at
https://www.wpiinc.com/manuals.
13142
803025
503535
STX2-PLUS
300749
EVOM3
99673
Fig. 2—The EVOM3 includes these parts.
NOTE: An 99672 EVOM2 to EVOM3 Electrode Adapter is sold separately. The
,  and all  eie the e  thi adat ith the EVOM3. See
"Accessories" on page 28.