WPI EVOM3 - Making Resistance Measurements

22 World Precision Instruments
Making Resistance Measurements
1. Power on the EVOM3 using the power switch on the rear panel.
  a filename the than the dealt (late) i eied, he hethe  ill
e a efi and atindeing  a nie file name
• Press and hold the
Store button on the main screen for 2 seconds or press
Store Screen on the Setting een t nfige  ted data file
Fig. 38—Store options screen.
•  e a efi and atindeing, atiate the Auto Index radio button.
Then, press Store Prex t ente a file name , t e a nie file name,
deactivate the Auto Index radio button. Then, select File Name to enter a new
name.
Fig. 39—Keyboard to enter a unique le name.
• Press Clear .
• Use the on screen keypad to enter a new name.
• Press Enter .
NOTE t indeing hange the name t a nmei eene matted ith
the name, a efi and a eential nme (nameefi)
3. Press
Setup to access the Setup menu.
Fig. 40—Setup page