WPI EVOM3 - Storing Measurement Data

EVOM3
World Precision Instruments 15
Storing Data
1. Press and hold the Store button on the main screen for 2 seconds or press Store
Screen on the Setting een t nfige  ted data file
Fig. 24—Use the Store Options screen to save a data le.
2. Press
New Plate to clear any recorded data on the preview screen and from
memory.
CAUTION: This will clear any readings saved in the preview grid.
3. Press
File Name t ente a nie name   data file n the ent age, elet
Clear , then te the file name, and e Enter hen  finih   he t
e  file name, atindeing mt e dialed
Fig. 25—Press Clear. Type the desire name. Press Enter.
4. If you prefer to use the
Auto Index function, press Store Prex t ente a nie
file name that ill e aended ith eential nme eah time  file i
saved. Select the Auto Index radio button to enable the Store Prex and Auto Index
buttons .
5. Press Auto Index if you want the EVOM3 to automatically number the new data
file eentiall t indeing hange the name t a nmei eene
matted ith a efi and a eential nme (efi)
6. Press Store Now to save the current data set. There is a time out if the USB write
ail  thi e , the aing file ntie ill nt hange t File aed
 file i tiall aed in le than  end   file de nt ae, e
Return and t ing a dieent  die
7. Press
Return .