Wren V5US - Important note on volume control when using Bluetooth

English
35
As with all Bluetooth pairings with audio devices, the volume control of your
Wren V5US functions as a “master” volume control. That means that, when you
are using Bluetooth, the volume control on the V5US governs how loud your
music can play. Once you have set the volume level on the V5US, the volume
control on your source device allows you to play music ranging from very low
to as high as your V5US “master” volume setting allows. For best results, we
suggest setting the master volume control on the V5US at or near maximum
volume. The best way to determine where to set the volume on the V5US is to
use the following steps:
• Set the volume control on the V5US at about half of maximum.
• Set the volume control on your source device at or just below maximum.
• Play music that you are familiar with.
• Raise the volume control on the V5US in small steps until it is as loud as you
think you will want it to play.
• Turn the volume down on your source device. You will find that it goes from
the peak loudness you established all the way down through medium to
soft to inaudible.
• You can now use your source device to play music from very low to as
loud you have set the V5US to play. This enables you to manage volume
remotely using your source device.
Important note on volume control
when using Bluetooth