Wurtec S3 Communicator - User Preferences - Maintenance Announcements On;Off; User Preferences - Timing Out

26 Buy Online! Wurtec.com Buy Online! Wurtec.com 27
Warranty Policy
DAMAGES DURING SHIPPING
Should your package arrive damaged, you must contact the shipping company to place the
claim. We cannot do this for you. Do not ship the material back before the carrier inspects the
shipment or we cannot issue credit.
RETURN POLICY
A return goods authorization (RGA) number must be obtained from the sales department
before returning goods for warranty reasons, repair service, or credit. Items received without
authorization may be returned at your expense.
WARRANTY
Wurtec Inc., Toledo, Ohio, warrants the manufactured products, to the original purchaser, to
be free from defects, in materials and workmanship, during normal use and services, for a
period of one (1) year after installation, subject to the following conditions:
A. A defective product shall be returned to Wurtec Inc. identied with our return
authorization number and freight prepaid, within fteen (15) days after discovery of
possible defect. Wurtec Inc. reserves the right to request proof of purchase as well as
other proof to document warranty claim.
B. Specically, this warranty does NOT cover products claimed to be defective which
have been damaged or failed due to ordinary wear and tear, neglect caused by lack of
proper maintenance or service, misuse, accidents, improper application or installation,
alterations or Acts of God.
C. Products of other manufacturers, supplied by Wurtec Inc., are covered by that
manufacturer’s warranty.
Wurtec Inc.’s obligation under this warranty shall be limited to replacing or repairing, at
our option, the parts or product subject to availability, which have been returned to us and
deemed defective. Replaced or repaired parts or products shall be shipped, FOB, our plant.
Any other damages or claims are hereby expressly waived by the purchaser.
This warranty is your assurance of a quality product. Wurtec Inc. is dedicated to customer
satisfaction. You can expect prompt and courteous attention to your service needs from us.
Glossary
Immediate Two-Way Conversation
This option disables the automated message the operator will get when an emergency
call is placed from the S3 Communicator. If this option is enabled the operator will NOT
automatically receive the site ID message, the operator will have to press
2
to receive the
message. The operator will not be prompted to press
2
. But you WILL be able to talk
immediately.
Maintenance Announcements
These are announcements that are played inside the elevator car if one of the following
parameters are met: The building power goes down, the telephone line has gone down, or
the battery has failed.
Ring - Down Line
A ring down line is a phone line that does not require a number to be dialed. Once the phone
is picked up or “on hook” the phone will automatically dial to a predetermined phone on the
other end. When programming use a single
VOL UP
to add a 2 second pause.
Site ID Message
This is a message that is recorded by the person programming the S3 Communicator. This
is the message played for the operator automatically once the call is accepted. A typical site
ID message should consist of: building name, address, elevator number if more than one is
present, and a callback number.
Telco
Telephone Line
“Wink” Signal
A wink signal is a momentary drop in voltage on a telephone line. This signal is something
the phone detects and perceives it as the “hang up” signal. When a conversation is over, one
person will hang up the phone on one end, a wink signal is sent which in turn hangs up the
phone on the other end. This is an automatic process.