12
Web UI
The Web UI is an intuitive software interface for users to manage and control the device with ease, which be accessed through a web browser, e.g.
Chrome, Safari, Firefox, Microsoft Edge, etc.
To access the Web UI:
1. Connect the CONTROL port (or the ETHERNET 1/2 port in Transparent Network mode) of the device to a local area network.
Tip: Ensure there’s a DHCP server in the network so that the device can obtain a valid IP address.
2. Connect the PC to the same network as the device.
3. Input the device’s IP address in the browser and press Enter, the following window pops up. To quickly view the IP address, see OSD section.
4. Input the password (default password: admin) and click Login.
Set up a new login password in the following dialog box and Save and Continue to enter the main page.
Note: The new password must be alphanumeric only with 4 to 16 characters in length.
The main page is split into the following tabs: General, Video Settings, Wireless and Display Control.
General: provides settings of splash screen, USB switcher, network, network security, login password, rmware, system reboot, etc.
• Video Settings: provides settings of input switching, output, EDID and auto switching.
• Wireless: provides settings of device name, wireless screen sharing and access point.
• Display Control: provides settings of CEC, RS-232, control strategy and display on/off.
General Tab
Splash Screen
To Next Page
Loading...
