17
EDID Settings
This section is used for EDID settings of input ports.
UI Element Description
Primary Output Timing
Set the output timing for HDMI OUT1. Two operation methods are offered in the following:
• Auto: select to output the optimal resolution of the attached display based on the display’s EDID.
E.g. If the recommended resolution for the display is 4K@60Hz, the device will output 4K@60Hz video.
• Resolution range list: select a desired output resolution from the dropdown menu to output this xed resolution.
Maximum supported resolution for HDMI OUT1 is 4K@60Hz.
Default setting: Auto
Secondary Output Timing
Set the output timing for HDMI OUT2. Two operation methods are offered in the following:
• Auto: select to output the optimal resolution
• supported by the attached display based on the display’s EDID.
• E.g. If the recommended resolution for a display is 4K@30Hz, the device will output 4K@30Hz video
• Resolution range list: select a desired output resolution from the dropdown menu to output this xed resolution.
Maximum supported resolution for HDMI OUT2 is 4K@30Hz.
Default setting: Auto
Refresh Click to refresh the latest status of the output timing.
Output HDCP Support
Enable/disable HDCP encryption for HDMI OUT 1-2. Two options are offered in the following:
Enable: select to enable HDCP encryption for
HDMI outputs.
Disable: select to disable HDCP encryption for
HDMI outputs. Default setting: Enable
Dual Display Settings
This item instructs the device how to assign video sources to HDMI OUT1 and HDMI OUT2.
• Auto: The two attached HDMI displays select
video sources automatically according to the LIFO (Last in, rst out) rule. For more information, refer to the Display
Mechanism of HDMI OUT 1 & HDMI OUT 2 section.
• Fixed: Select to activate Dual Desktop mode. For more information about Dual Desktop mode, refer to the Dual Desktop
Mode for HDMI inputs section. Tip: Prior to use Dual Desktop feature, ensure the two HDMI inputs and two output ports
are connected to available HDMI devices.
Default setting: Auto
Apply Click to perform current settings.
UI Element Description
TYPE-C-1 / TYPE-C-2 /
HDMI1 / HDMI2
Set input EDID for TYPE-C-1 / TYPE-C-2 / HDMI1 / HDMI2. Conguration options are offered in the following:
• 4K@30Hz, Audio 2CH PCM.bin
• 1080P@60Hz, Audio 2CH PCM.bin
• 1080P@60Hz, No Audio.bin
• 720P@60Hz, Audio 2CH PCM.bin
Default setting: 4K@30Hz, Audio 2CH PCM.bin
Tip: To input a customized EDID le for the input ports, just upload the EDID le as desired in the EDID File eld.
Secondary Output Timing
Browse: Click to select the local EDID le.
Upload: Click to upload the EDID le to the device’s input ports.
To Next Page
Loading...
