Wyrestorm SW-640L-TX-W - Version Information; Video Settings Tab; Input Switching; Output Setting

16
Version Information
Video Settings Tab
Input Switching
This section is used for switching among multiple input sources for the HDMI OUT 1-2 and displaying the sources’ statuses, including video channel
names, resolutions and video format.
Output Settings
This section is used for settings of output timing and HDCP, plus Dual Display.
UI Element Description
Version Shows the device’s rmware version.
Build Time Shows the time and date when the device’s rmware was built.
UI Element Description
HDMI Out 1
Click the button to select (button turns from white to blue) or deselect (button turns from blue to white) the specied video
source for HDMI OUT1.
HDMI Out 2
Click the button to select (button turns from white to blue) or deselect (button turns from blue to white) the specied video
source for HDMI OUT2.
Show Guide Screen Click the button to output the Guide Screen (button turns from white to blue).
Refresh Click to refresh the current state information.