Wyrestorm SW-640L-TX-W - Auto Switching; Wireless; Device Name; Wireless Screen Sharing

18
Auto Switching
Wireless
Device Name
Wireless Screen Sharing
UI Element Description
Auto Switching
Click to enable/disable the Auto Switching function.
Default setting: Enable
Note: For more information about Automatic Switching feature, refer to Automatic Signal Switching.
Apply Click to perform current settings.
UI Element Description
Device Name
Dene the device name to an easy-to-remember one. This name also acts as the name for soft AP and for the
receiver of Airplay and Miracast.
Note: The name must be 1~20 characters in length, including letters, numbers, “_” or “-”.
By default, it’s set as SW-640L-TX-W.
Apply Click to perform current settings.
UI Element Description
Band
5G: Congure the device’s frequency band as 5GHz.
2.4G: Congure the device’s frequency band as 2.4GHz.
By default, the device works at 5GHz. If your wireless devices don’t support 5GHz Wi-Fi, congures the frequency band as
2.4G before connecting them to the device via Miracast.
Default setting: 5G
Channel
Congure the device’s wireless channel.
Default setting: Auto
Auto means the device selects a wireless channel automatically for itself.
Apply Click to perform current settings.