13
• Browse: click to select a new picture for the splash screen.
Note: Picture in jp(e)g format with 1920x1080 pixels is recommended.
• Apply: click to upload the selected picture to the device.
USB Switcher
Network Settings
UI Element Description
USB Host
Click to select the USB host port of the built-in USB 3.0
switcher:
• USB-C-1: Select USB-C IN 1 as the USB host.
• USB-C-2: Select USB-C IN 2 as the USB host.
• HOST 1: Select USB HOST 1 as the USB host.
• HOST 2: Select USB HOST 2 as the USB host.
• Disconnected: Disconnect the link between the USB host and USB devices.
• Auto: Select among the above USB host ports as the USB host automatically. In this mode, the latest connected USB
channel (USB-C 1 / USB-C 2 / USB HOST 1 / USB HOST 2 / Dongle) will be selected as the USB host automatically.
By default, it is set as Auto.
Apply Click to perform current settings.
To Next Page
Loading...
