97-0019-01-01 73
Configuring the Freedom SW using the SCP
Resetting the Freedom SW to Default Settings
The
Restore Defaults
command returns the Freedom SW to
factory default settings. After using the
Restore Defaults
command, the Freedom SW is no longer configured for the power
system.
To restore Freedom SW default settings:
1. On the Adv Settings menu, select Restore
Defaults.
Warning W252 appears, asking to confirm the command.
2. To cancel the command, press Func. To continue with
the Restore Defaults command, press Enter.
IMPORTANT: If a warning is already active in the system, selecting
Restore Defaults brings up the Warnings list, with warning W252 at the
top. Press Enter to view W252 and continue with the restore defaults
process.
EQUIPMENT DAMAGE
Do not restore defaults while the Freedom SW is operating. De-energize
the power system and disconnect the Freedom SW AC input before
restoring defaults. Reconfigure the Freedom SW before reconnecting the
AC input and re-energizing the power system.
Failure to follow these instructions can damage the unit and/or damage
other equipment.
FSW Owners Guide.book Page 73 Tuesday, August 7, 2018 9:03 AM
To Next Page
Loading...
Need help?
General
