74 Freedom SW Owner’s Guide
Configuring the Freedom SW using the SCP
Using the Advanced Features
Figure 34 Adv Features Menu Screen
FSW3012 00: Adv Features
StoreInvState [Disabled]
[*Disabled] [Enabled]
Follow procedures on “To select and change a
configurable setting:” on page 43 to change the settings.
Table 18 Adv Features Description and Values
a
a. Applies to all Freedom SW models.
Item Description Default Range
StoreInvSt
ate
This feature
is available
only to
Freedom SW
2024 (PN:
815-2024)
When enabled
remembers the state of
the inverter function prior
to a power down (that is,
when AC and DC power
sources are disconnected)
or prior to a Standby
(Power Save) mode.
When the Freedom SW is
powered up again or put
back on Operating mode,
the inverter function
reverts back to its prior
state.
Disabled Disabled
,
Enabled
FSW Owners Guide.book Page 74 Tuesday, August 7, 2018 9:03 AM
To Next Page
Loading...
