Default Settings
975-0799-01-01 9
Feature Description
15
20 A supplementary protector with reset button
provides overload protection for the Freedom XC
PRO GFCI Kit (PN: 808-9817) (sold separately)
option.
Press to recover from an overload condition. In a
hard wired installation, the supplementary protector
does not protect output wiring.
16
Ventilation grille (openings) must not be obstructed
for the proper operation of the cooling fan and
inverter/charger. When the inverter/charger is
mounted, the ventilation grille must not point up or
down.
Cooling fans turn on when the internal temperature
reaches a set point temperature.
17
Mounting flanges on both sides allow you to mount
the inverter/charger permanently on deck or on a
wall.
WARNING
ELECTRICAL SHOCK HAZARD
l
Use a torque screwdriver to tighten the bolt on the DC ground
lug to a torque of 23 in-lb (2.6 N-m) of force.
l
Apply an anti-corrosion compound to the copper wire prior to
connecting to the DC ground lug.
Failure to follow these instructions can result in death, serious
injury, or equipment damage.
To Next Page
Loading...
