Xantrex Freedom XC PRO 3000

Operating During Transition Between Grid Mode and Battery Mode
70 Freedom XC PRO Owner's Guide
Adjusting Feature Settings in
Configuration Mode
The , Scroll , and buttons can be used to cycle
through the various feature settings:
1.
Press and hold the button for three seconds to enter the
feature settings mode.
2.
Press the Scroll button to move through the different
feature settings. Press and hold for three seconds to go
back one step.
OUTPUTBATTLOAD
kW
100%
25%
Hz
VA
%
kW
Hz
VA
%
C
INPUTBATTTEMP
AC
BYPASS
ERROR
OVERLOAD
CHARGING
 

1 2
1 setting number is displayed here
2 setting value is displayed here
To change the default value to a different value:
1.
Press and hold the button for three seconds to enter the
feature settings mode.
2.
Press the Scroll button to move through the different
feature settings. Press and hold for three seconds to go
back one step.
3.
Press the button to select a setting number and change
its value.
4.
Press the Scroll button to change the value until you
reach the desired value.
5.
Press the button to confirm the change.
6. Repeat the previous steps to set other feature settings.
7.
Press the button to exit the feature settings mode.