Xantrex SOLAR CHARGE CONTROLLER 30 - Product Features Overview

Product Features
The charge controller is equipped with the following features:
n Employs advanced 3-stage pulse width modulation
(PWM) charging algorithm optimized for charging 12 VDC or
24VDC nominal rated rechargeable batteries, such as:
l Sealed(AGM)
l GEL
l Flooded (FLD)
l Lithium-ionIronPhosphate (LFP)
n Full charging operation at a wide temperature range,
such as:
l between –20to55°C (for lead-acid batteries)
l between 0to55°C (for lithium-ion)
n Battery temperature compensationwhich works with the
30A PWM Charge Controller and the optional Remote Battery
Temperature Sensor (PN: 708-0080)-charging parameters
are automatically adjusted for efficient charging of the battery.
n LCDDisplay-located on the front panel of the unit and is
equipped with control buttons.
n Electronic protection from over-charging, input overloading,
and short-circuiting.
975-1012-01-01 Rev B
Oct 2019
11