XCell
TM
ATF System with C410:V3 Controller
Appendix 3: Declaration of Conformity
EU Declaration of Conformity
The C410:V3 Controller for XCell
TM
ATF 4, ATF 6, and ATF 10 system operation has been
assessed for CE regulations applicable under the Machinery Directive 2006/42/EC including
the Essential Health and Safety Requirements of Annex 1, the Low Voltage Directive
2014/35/EU, and the Electromagnetic Compatibility Directive 2014/30/EU, and is designed
to comply with the objective of the mentioned Directives.
XCell
TM
ATF4, ATF6, and ATF10 pump falls under the article 3.3 of the Pressure Equipment
Directive 97/23/EC and indicate the pumps are compliant with the SEP (Sound Engineering
Practice). For XCell
TM
ATF pumps shipped after July, 18, 2016, the XCell
TM
ATF4, ATF6, and
ATF10 pump falls under the article 4.3 of the Pressure Equipment Directive 2014/68/EU and
indicate the pumps are compliant with SEP.
As the pump and the controller are designed to be used as a system, the pump does not
carry the CE mark. Per the Directives, it is considered to be part of the system covered by
the Machinery Directive, which is extended to include the controller and pump housing.
A sample Declaration of Conformity certificate is shown on the next page.
To Next Page
Loading...
Need help?
General