September 2001 88XX Series Folder Operator Manual 39
Error messages and the required actions are listed below.
e-01 ENTRY ALARM 1
Remove the paper jam between the printer exit and the folder entry. Press
“Reset”.
e-02 ENTRY ALARM 2
TBD
e-03 BRIDGE ALARM
Remove the paper from the bridge and press “Reset”. Refer to the
Clearing Bridge Jams procedure.
e-04 ROTATION ALARM
Remove the paper from the bridge and press “Reset”. Refer to the
Clearing Bridge Jams procedure.
e.-05 POCKETS ALARM
Perform the Clearing Fan Folder Jams procedure, or check for a jam in
the pockets. Refer to the Clearing Upper and Lower Pocket Jams
procedure.
e-06 FOLDING ALARM 1
Perform the Clearing Fan Folder Jams procedure, or check for a jam in
the pockets. Refer to the Clearing Upper and Lower Pocket Jams
procedure.
e-07 FOLDING ALARM 2
Perform the Clearing Fan Folder Jams procedure, or check for a jam in
the pockets. Refer to the Clearing Upper and Lower Pocket Jams
procedure.
e-08 FOLDING ALARM 3
Perform the Clearing Fan Folder Jams procedure, or check for a jam in
the pockets. Refer to the Clearing Upper and Lower Pocket Jams
procedure.
e-09 FAN FOLDER EXIT ALARM
Remove a jam from Upper Pocket or Conveyor Guide. Refer to the
Clearing Upper and Lower Pocket Jams procedure.
e-10 TRANSPORT ALARM
Open the Lower Pocket and remove a jam from Conveyor Belt. Refer to
the Clearing Upper and Lower Pocket Jams procedure.
e-11 CROSS ENTRY ALARM
Perform the Clearing Fan Folder Jams procedure or remove a jam
manually. Refer to the Clearing Cross Folder Jam procedure.
e-12 CROSS EXIT ALARM
Perform the Clearing Fan Folder Jams procedure, or remove the jam
manually. Refer to the Clearing Cross Folder Jam procedure.
e-13 NOT FOLDABLE
Print not foldable, see Problem Solving
E-14 NOT AVAILABLE SELECTION
The selection made regards a not installed part (KIT), or future options.
E-15 LAPS WITHOUT ADJUSTMENT
E-16
TBD
E-17 PROGRAM NOT SELECTABLE
To Next Page
Loading...
