Cleaning the Printer
Xerox
®
B210 Printer
User Guide
116
3. Pull the toner cartridge out and place it on a clean flat
surface. Then remove the drum cartridge and place it on
a clean flat surface.
CAUTION:
• To prevent damage to the drum cartridge, do not
expose it to light for more than a few minutes. Cover
it with a piece of paper, if necessary.
• Do not touch the green surface on the underside of
the cartridge. Use the handle on the cartridge to
avoid touching this area.
4. With a dry, lint-free cloth, wipe away any dust and spilled
toner from the cartridge area inside the printer.
CAUTION: While cleaning the inside of the printer, be
careful not to damage any inside parts. Do not use
solvents such as benzene or thinner to clean. Printing
quality problems can occur and damage can be caused
to the printer.
5. Re-install the drum cartridge and then the toner
cartridge. Tabs on the sides of the cartridge and
corresponding grooves within the printer will guide the
cartridge into the correct position until each locks into
place.
6. Close the front cover.
1
2
To Next Page
Loading...
Need help?
General