Xerox B210DNI User Manual

802.1x
Xerox
®
B210 Printer
User Guide
173
802.1x
802.1x is an Institute for Electrical and Electronics Engineers (IEEE) standard that defines a method for
port-based network access control or authentication. In an 802.1x secured network, the printer must be
authenticated by a central authority, typically a RADIUS server, before it can access the physical
network.
Before you begin:
• Ensure that your 802.1x authentication server and authentication switch are available on the
network.
• Determine the supported authentication method.
• Create a user name and password on your authentication server.
Note: This procedure causes the printer to restart and be unavailable over the network for several
minutes.
Configuring 802.1x
1. In Xerox
®
CentreWare
®
Internet Services, click Properties  Security.
2. Click 802.1x.
Note: If prompted to enter a user name and password, for information about logging in as an
administrator, refer to Accessing the Xerox
®
CentreWare
®
Internet Services Administrator Account.
3. For 802.1x, select Enabled.
4. For Authentication Method, select an option:
•EAP-MD5
•PEAP
•EAP-MSCHAPv2
•EAP-TLS
5. If you select EAP-MD5, EAP-MSCHAPv2 or PEAP, the Credentials option appears. Enter the
required details in the Username and Password fields.
6. To upload a root certificate:, do the following steps.
a. For Upload Root Certificate, to locate and select the file, click Browse or Choose File.
b. Click Upload.
7. To upload a client certificate, do the following steps.
a. To locate and select the Client Certificate, for Upload Client Certificate, click Browse or
Choose File.
b. To assign a private password, for Private Key Password, type a password.
c. Click Upload.
8. Click Apply.

Xerox B210DNI Specifications

General

Brand	Xerox
Model	B210DNI
Category	Printer
Language	English