In-scope products are Household and Office equipment that meet the following criteria:
• Standard monochrome format products with a maximum speed less than 66 A4 images per
minute
• Standard color-format products with a maximum speed less than 51 A4 images per minute
Environmental Benefits of Duplex Printing
Most Xerox products have duplex printing capability, also known as 2-sided printing. Two-sided
printing enables you to print on both sides of the paper automatically, and therefore helps to reduce
the use of valuable assets by reducing your paper consumption. The Lot 4 Imaging Equipment
agreement requires that on models greater than or equal to 40-ppm color or greater than or equal to
45-ppm monochrome, the duplex function has been auto-enabled during the setup and driver
installation. Some Xerox models below these speed bands can be enabled with 2-sided printing
settings defaulted on at the time of installation. Continuous use of the duplex function reduces the
environmental impact of your work. However, if you require 1-sided printing, you can change the print
settings in the print driver.
Paper Types
This product can be used to print on both recycled paper and virgin paper, approved to an
environmental stewardship scheme, which complies with EN12281 or a similar quality standard.
Lighter weight paper of 60 g/m², which contains less raw material and thus saves assets per print, can
be used in certain applications. You are encouraged to verify if lighter weight paper is suitable for
your printing needs.
ENERGY STAR
The ENERGY STAR program is a voluntary scheme to promote the development
and purchase of energy-efficient models, which help to reduce the
environmental impact. Details on the ENERGY STAR program and models
qualified to ENERGY STAR can be found at the following website: www.
energystar.gov.
The ENERGY STAR and ENERGY STAR mark are registered United States trademarks.
The ENERGY STAR Imaging Equipment Program is a team effort between the United
States, European Union, Japanese governments, and the office equipment industry. This
image-equipment program promotes energy-efficient copiers, printers, fax, multifunction
printers, personal computers, and monitors. Reducing product energy consumption helps
to combat smog, acid rain, and long-term changes to the climate by decreasing the
emissions that result from generating electricity.
For more information on energy or other related topics, go to www.xerox.com/environment or www.
xerox.com/environment_europe.
Power Consumption and Activation Time
The amount of electricity that a device consumes depends on the way the device is used. This device
is designed and configured to enable you to reduce your electricity usage.
To reduce energy consumption, your device is configured to use Energy Saver modes. After the last
print, the device transitions to Ready mode. In Ready mode, the device can print again immediately.
If the device is not used for a specified period, the device transitions to Sleep mode. To reduce power
consumption, only essential functions remain active in Sleep mode. The device takes longer to
374
Xerox
®
AltaLink
®
C81XX Series Color Multifunction Printer
User Guide
Regulatory Information
To Next Page
Loading...
Need help?
General
