Replacing Staples in the Booklet Maker of the Business Ready Finisher
Caution: Do not perform this procedure when the printer is copying or printing.
1. Open the front door of the Business Ready Finisher.
2. Grasp the booklet maker handle and pull the unit toward you until the staple cartridges appear
on the top edge of the device.
3. To remove a staple cartridge from the booklet maker, push down on the staple cartridge handle,
as shown, then pull the cartridge out and up.
4. Turn over the staple cartridge.
264
Xerox
®
AltaLink
®
C81XX Series Color Multifunction Printer
User Guide
Maintenance
To Next Page
Loading...
