Xerox C8145 User Manual

3. For the rear spacer plate, place the tabs at the bottom of the plate into the slots that correspond
with the correct paper size. Slide down the spacer plate, then engage the peg on the top of the
tray with the matching hole in the spacer plate. To secure the spacer plate, install the screw.
Repeat the procedure for the spacer plate at the front of the tray.
4. On the top of the side gate, lift the pin, then guide it into the required paper size in the slot. To
lock the side gate into place, release the pin.
5. Load paper, close the side gate, then close the tray.
6. At the control panel, select the correct type and color.
7. To confirm the settings, touch Confirm.
For information about loading paper in Tray 6, refer to Loading Paper in Tray 6.
Xerox
®
AltaLink
®
C81XX Series Color Multifunction Printer
User Guide
37
Getting Started

Xerox C8145 Specifications

General

Print Resolution	1200 x 2400 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Monthly Duty Cycle	Up to 200, 000 pages
Print Speed	Up to 45 ppm
Connectivity	Ethernet 10/100/1000 Base-T, High-Speed USB 3.0
Automatic Document Feeder	130 sheets
Functions	Print, copy, scan, fax, email
First-page-out Time, Copying	As fast as 5.5 seconds (black/white), 6.5 seconds (color)
Duplex Printing	Yes
Paper Sizes	A4, A5, A6, B5, Legal, Letter, Executive, Envelopes
Memory	4 GB
Mobile Printing	Apple AirPrint, Google Cloud Print, Mopria, Xerox Print Service Plug-in for Android
Control Panel	10.1 inch color touchscreen
Scan Destinations	Email, Network, USB
Fax Speed	33.6 Kbps
Operating System Compatibility	Windows, macOS, Linux
Dimensions	23.4 x 25.2 x 30.1 in. / 595 x 640 x 765 mm