Xerox Color J75 Press - Page 138

024-747
Cause: An illegal print parameter combination was set. For example, a non-standard
size was specified and Tray Selection was set to Auto.
Remedy: Check the print data. In the above case, select Tray 5 (Bypass).
024-987
Cause: The envelope folder tray is full.
Remedy: Remove all paper from the tray. Set the output tray for three fold.
024-988
Cause: The envelope folder tray is not detected.
Remedy: Check that the folder tray is correctly attached and set.
027-452
Cause: IP address already exists.
Remedy: Change the IP address.
027-453
Cause: Failed to obtain IP address from DHCP server.
Remedy: Change the IP address manually.
027-700
Cause: The medium is damaged.
Remedy: Check the media with a computer.
027-701
Cause: A medium is not inserted correctly.
Remedy: Insert the medium correctly.
027-702
Cause: No data is stored in the medium, or the data stored in the medium is damaged.
Remedy: Check the data stored in the media with a computer.
027-703
Cause: A media reader is not connected with the machine correctly.
Remedy: Check the connection between the media reader and the machine.
027-720
Cause: Unable to find the server of an application interface destination.
Remedy: Check DNS server address. Or check whether an application interface
(CentreWare Flow Service) installed on the computer is registered by DNS server or not.
027-721
Cause: An application interface destination does not exist.
Xerox
®
Color J75 Press10-22
User Guide
Problem solving