More button
Displays the Paper Supply screen showing all available trays for the machine and their
media content.
Output Color
Select the desired Output Color option which best applies to the job. The options include:
Auto Detect
This option allows the machine to automatically detect if the original document is in
color or black and white.
Color
This option generates copies with full color output, using all four printing colors - cyan,
magenta, yellow, and black.
Black and White
This option copies in black and white only. Colors in the original are converted to shades
of gray.
Dual Color
This option allows you to separate the colors of the original into two groups of colors
for copying. The source color is extracted from the original and replaced by the target
area color. The rest of the colors are replaced by the non-target area color that you
select.
Single Color
This option allows you to copy in one of the preset or custom colors.
More
This option allows you to make selections for Dual Color and Single Color. Dual Color
allows you to separate the colors of the original into two groups of colors for copying.
Source Color will be replaced by the selected Target Area Color. The rest will be replaced
by the Non-Target Area Color. Single Color allows you to select the one color that will
print when Single Color is selected.
Copy Output
Important
Copy output options vary depending on the finishing devices attached to your machine.
Note
Copy output may be accessed either from the main Copy screen or from the Output
Format tab.
5-5Xerox
®
Color J75 Press
User Guide
Copy
To Next Page
Loading...
Need help?
General
Weight and Dimensions
