3. Close the green handle(s).
4. Close the HCS Front Cover.
5. If the UI indicates there is a jam in the print engine, follow the instructions on the
screen to remove any paper in the area indicates.
6. Follow the instructions displayed on the UI to resume printing.
HCS transport jams (E4, E5, and E6)
Perform the following steps to clear the jam and resume printing:
1. Open the HCS Front Cover.
2. Lift the green handle(s) and/or rotate the green knob and remove all paper in the
entrance area.
3. Close the green handle(s).
4. Close the HCS Front Cover.
Xerox
®
Color J75 Press14-6
User Guide
High Capacity Stacker (HCS)
To Next Page
Loading...
